Апдейт RОМ 04->05 на Dell Axim X5 Advanced. Help!!!
Апдейт RОМ 04->05 на Dell Axim X5 Advanced. Help!!!
Проблема следующая, купил я вышеназванный девайс и столкнулся с непонятными тормозами. Почитав ветку выяснил, что проблема в прошивке. Обсуждался этот вопрос ок 3-х лет назад, и нигде я не смог найти ссылки на сам апдейт. Тем более думаю маловероятно сейчас будет найти диск с ним. Помогите люди добрые, не оставьте в печали! Вобчем нужен апдейт ROMa на Dell Axim X5 Advanced с А04 на А05.
В общем не знаю:( Наверно к утру я его убью! Излазил инет скачал несколько каких-то прошивок. Вот эта вроде какая нужна-P25_NK_H_07170300EN. скопировал её на CF а далее по инструкции:
1. Find and download the A05 R64365 ROM update from
http://www.faris.ukonline.co.uk/blog/PP ... %20ROM.EXE
2. Open PPC2003 archive to extract the files contained to your Hard Drive.
3. Take a Compact Flash (I used a 64MB Compact Flash Card) and Format it with your PC.
4. Go to the folder where you extract the files in step 2 and copy to the root (not in a folder) of the Compact Flash Card, the file "P25_NK_H_07170300EN.IMG" (That is the ROM of PPC2003). There is another .IMG file in the directory of "P25_NK_H_07170300EN.IMG" (if doesn't work then try the other .IMG file). The archive is big, between 25 to 31MB may be more or less but must be big.
5. Insert the Compact Flash Card with the .IMG file into your Axim X5.
6. Remove Backup Battery and leave it removed, don't insert until you have finished PPC2003 installation.
7. Remove Main Battery and insert it again.
8. Remove and reinsert your Compact Flash Card.
9. Make this combination of Keys: Push RESET + PRESS SCROLL IN BUTTON + CONTACTS BUTTON + POWER
10. Remove your fingers from RESET and POWER BUTTONS but continue to press the SCROLL IN BUTTON and CONTACTS BUTTON for about 20 seconds. THIS MAY TAKE MORE THAT ONE TRY.
11. Soon you will see a white screen with information about ROM and RAM.
This is the boot of the pocket. It will detect the .IMG file from CF card and will continue to erase the ROM and copying the new ROM from CF Card.
12. After completing installation just follow the instructions that appear on your screen and you have Windows Mobile 2003.
А далее после пункта 10 выскакивает сообщение об ошибке и винды просто загружаются как после ресета.
P.S. в системе менял региональные установки на Английские-оди и тот же результат.
Хотя бы напиши как файло с прошивкой называется и скока весит. Может его можно как-то через кабель обновить?
1. Find and download the A05 R64365 ROM update from
http://www.faris.ukonline.co.uk/blog/PP ... %20ROM.EXE
2. Open PPC2003 archive to extract the files contained to your Hard Drive.
3. Take a Compact Flash (I used a 64MB Compact Flash Card) and Format it with your PC.
4. Go to the folder where you extract the files in step 2 and copy to the root (not in a folder) of the Compact Flash Card, the file "P25_NK_H_07170300EN.IMG" (That is the ROM of PPC2003). There is another .IMG file in the directory of "P25_NK_H_07170300EN.IMG" (if doesn't work then try the other .IMG file). The archive is big, between 25 to 31MB may be more or less but must be big.
5. Insert the Compact Flash Card with the .IMG file into your Axim X5.
6. Remove Backup Battery and leave it removed, don't insert until you have finished PPC2003 installation.
7. Remove Main Battery and insert it again.
8. Remove and reinsert your Compact Flash Card.
9. Make this combination of Keys: Push RESET + PRESS SCROLL IN BUTTON + CONTACTS BUTTON + POWER
10. Remove your fingers from RESET and POWER BUTTONS but continue to press the SCROLL IN BUTTON and CONTACTS BUTTON for about 20 seconds. THIS MAY TAKE MORE THAT ONE TRY.
11. Soon you will see a white screen with information about ROM and RAM.
This is the boot of the pocket. It will detect the .IMG file from CF card and will continue to erase the ROM and copying the new ROM from CF Card.
12. After completing installation just follow the instructions that appear on your screen and you have Windows Mobile 2003.
А далее после пункта 10 выскакивает сообщение об ошибке и винды просто загружаются как после ресета.
P.S. в системе менял региональные установки на Английские-оди и тот же результат.
Хотя бы напиши как файло с прошивкой называется и скока весит. Может его можно как-то через кабель обновить?
to DIMONSS
YES!!!!!!!!!!!!!!!!!!!
УРРРРРРРРААААААА!!! получилось тот архив был битый, установилось с другово.
вот ссыла кому надо http://www.ppcsoft.org/modules.php?name ... lid=185#dl
Огромное спасибо за моральную поддержку
YES!!!!!!!!!!!!!!!!!!!
УРРРРРРРРААААААА!!! получилось тот архив был битый, установилось с другово.
вот ссыла кому надо http://www.ppcsoft.org/modules.php?name ... lid=185#dl
Огромное спасибо за моральную поддержку
у меня процессор 300 мгц. значит, в образе должна быть буква L?
/решение вопроса добавленно по ссылке от sine http://depositfiles.com/files/3044719 Dart./
/решение вопроса добавленно по ссылке от sine http://depositfiles.com/files/3044719 Dart./
- Байкалов Пётр
- Нобелевский лауреат (7 lvl)
- Сообщения: 10381
- Зарегистрирован: Вс ноя 12, 2006 17:22